Top 10 common forklift mishaps ， forklift operation should take note of these matters ！.

Top 10 common forklift mishaps ， forklift operation should take note of these matters ！.

Blog Article

Do not take too lightly the forklift at the workplace. If the procedure is not good, there will certainly be serious crashes in minutes, and there are numerous crashes involving forklifts.

Instance 1: The forklift cargo obstructed the driver's sight, and the individual in front could not be discovered, resulting in a rolling accident.
Situation 2: In order to maintain the equilibrium of the forklift when lifting hefty items, the employees used their body weight as the counterweight, which nearly caused casualties.
Case 3: The width of the forklift cargo exceeds the allowable width of the course and hangs on the roadside shelf, which almost creates an accident.
Instance 4: Forklift is speeding and surrender throughout a turn.
Case 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift raises the personnel illegally, the forklift vehicle driver does not wear the seat belt, the forklift lifter falls and the driver is crushed when the forklift surrender.
Situation 7: The forklift motorist did not use a seat belt and fell from the lorry when it rolled over and was squashed.
Forklift operation ought to take notice of these matters ：.

Begin.
1. Before starting, observe the environments, and after validating that there are no barriers that impede the security of driving, beep the horn initially and after that start.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) scale should be risk-free before beginning.
3. When the forklift begins with a lots, the chauffeur ought to initially confirm that the load is secure and dependable.
4. The begin should be slow-moving and stable.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast ought to be tilted in reverse. .
2. Do not raise the fork expensive when driving. When going into and leaving the work site or while driving, beware that there will be no barriers overhead. When the lots is taking a trip, the fork should not be increased too expensive, which will certainly affect the security of the forklift. .
3. After dumping, the fork must be reduced to the typical driving setting before driving. .
4. When transforming, if there are pedestrians or automobiles nearby, the driving signal should be issued initially. High-speed doglegs are forbidden. High-speed doglegs will certainly cause the vehicle to shed lateral stability and topple. .
5. When the forklift is downhill, it is purely forbidden to switch off the fire and slide, and it is prohibited to brake all of a sudden while driving with lots unless there are unique scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and should keep a specific security range from the automobile ahead. .
7. When the forklift is running, the tons needs to remain in the most affordable placement that does not prevent the driving, and the gantry needs to be effectively slanted back. The lots will not be elevated other than when piling or packing. .
8. The height of the load should not block the driver's sight. In unique conditions, when the thing influences the forward vision, drive at a reduced speed when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is restricted for employees to depend on the fork to hold products and play a balancing role. .
12. If problems are located, they will certainly be repaired and reported in a prompt fashion, and they will never run with health problems or conceal them.

loading and dumping.
1. When fork-loading products, the distance in between the two forks should be readjusted as required to make the load of both forks balanced and not skewed, and one side of the product ought to protest the shelf. .
2. It is forbidden to collaborate with a single fork or use a fork top or draw. In special conditions, security warning signs should be set up to remind bordering pedestrians. .
3. In the process of loading and dumping products, the forklift must be stopped with the brake. .
4. The rate of the automobile should be sluggish and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it must be noted that the fork idea should not touch other items or objects. The tons needs to be supported with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted onward slightly when the tons is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with difficult things with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so as to prevent the collapse of the goods and harm individuals. .
8. Straining is prohibited, and it is restricted to make use of forks to raise personnel to engage in high-altitude operations to prevent high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to utilize forks to choose, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Draw the hand brake handle to dead or depress the parking brake button.
3. The engine is turned off and the power is removed. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not go beyond 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance should be checked, and gas, lubing oil and air conditioning water must be added.
2. Check the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature are regular.
5. After the forklift is running, the exterior leakage ought to also be examined and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You should check prior to leaving the auto;.
2. When you run into somebody in front of you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo need to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be as well sharp to prevent the propensity of "free switching";.
6. Running up and down the incline ought to be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the lorry ought to be driven in reverse when declining;.
8. When the forklift employees bring the goods and move on, if they experience huge or heavy items and go to the motorist's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Single fork operation is not permitted.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by turning over the pallet with the fork.
4. Electric Forklift Truck for Warehouse It is not enabled to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not permitted to use inertia force to get the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not allowed to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an Stand-on Electric Pallet Stacker obstacle on one side of the road, the opposite side of the section with the exact same size as the challenge need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844